Front Upper Control Arm Mounting Point Reinforcement Kit - Maverick R

Can-Am Maverick R Front Upper Control Arm Inner Pivot Gusset Kit

The AVID Racing Can-Am Maverick R Front Upper Control Arm Inner Pivot Gusset Kit is designed to reinforce the internal mounting points of the A-arms and their mechanical connection to the vehicle's frame, providing true race-level strength . It is a weld-on kit, laser-cut from 3/16-inch thick 4130 chrome-moly plate, utilizing AVID's signature milled weld pads that pass through the factory control arm pivot mounts.
Once installed, the control arm bolt runs in a precision machined, true 1/2-inch thick bore for maximum support and long-term durability of the internal pivot points.

What does this set offer in practice?

• Reinforcement of the inner pivot points of the upper control arms – milled weld washers pass through the factory mounts, creating a solid 1/2-inch machined hole for the control arm bolt.

• Mechanical connection to the frame – Reinforcement plates and weld pads connect the control arm mounts to the frame structure, reducing deflection and evenly distributing loads across the front of the vehicle.

• Designed for extreme use – ideal for long travel setups, racing crossovers, and aggressive desert and short course riding where the stock control arm mounting points are pushed to their limits.

• Clean, weld-in design – components are shaped to utilize standard mounting points, facilitating precise installation by a qualified contractor.

Key Features

• Direct Fit Upper Control Arm Inner Mounting Point Reinforcement Kit for Can-Am Maverick R

• Weld-on construction constructed from 3/16-inch thick 4130 chrome-molybdenum plate

• AVID milled weld washers that pass through the factory mounts and create a 1/2-inch machined hole for the control arm bolt

• Mechanically connects the upper control arm pivot points to the frame for increased stiffness and durability

• Designed to be the perfect complement to the AVID Maverick R front suspension and racing steering knuckle kits

Kit contents

• Left and right 4130 chromoly (3/16 inch) inner upper control arm mounting plate reinforcements

• AVID milled weld washers for the inner pivot points of the upper control arms

• Assembly tips for alignment and weld location

Assembly note:
This kit is designed to be welded and should only be installed by a qualified welder or chassis builder. Before installation, completely remove any paint or protective coatings from the weld areas.

ApexRace99 is the official importer and authorized dealer of the AVID brand, which guarantees:

• original product from a reliable source,

• full technical support.